EN

Plough Shear Mixer Machine

  • Plough Shear Mixer Machine
  • Plough Shear Mixer Machine
  • Plough Shear Mixer Machine
  • Plough Shear Mixer Machine
  • Plough Shear Mixer Machine
  • Plough Shear Mixer Machine


The ploughshare mixer machine is a new type of high-efficiency powder mixing equipment. It can be divided into stainless steel coulter mixer and carbon steel coulter mixer according to the material. It can be divided into horizontal coulter mixer and multi-purpose coulter according to the structure type. Mixer, etc.


Product Description of Plough Shear Mixer Machine

The ploughshare in the ploughshare mixer machine rotates with the main shaft to make the material move along the radial direction of the cylinder arm. At the same time, the radial material flows along the flying knife group along the line, and is scattered by the high-speed rotating flying knife, continuously changing and compounding. The mixing is achieved in a short time.


Structural Characteristics of Plough Shear Mixer Machine

The ploughshare mixer machine is generally cylindrical, horizontally driven, and has a local mixing slurry in the cylinder.

There are roughly four parts that affect the movement of materials.

One is the shape of the equipment, and the horizontal shape is cylindrical.

The second is the coulter, which is shaped like a plow. It is fixed on the horizontal transmission shaft by the bracket and rotates along the wall, so that the material can be used for both diffusion and friction sharing. At the beginning of material mixing, the coulter rotates, continuously updating the material surface, and at the same time increasing the activity of the particles, which is a typical diffusion mixing. At the same time, the particles rubbed against each other and had the effect of share mixing. The coulters are radially distributed on the horizontal drive shaft. The coulters have a certain angle between them. The movement does not insert the powder at the same time, which greatly reduces the resistance in the powder. One of the outstanding features of the coulter mixer is the low energy consumption of the mixing.

The third is a flying knife, which consists of three simple blades, similar to the fan blades of an electric fan. There are multi-layered, pagoda-like, placed under the side of the mixer wall, rotating speed of 1450 ~ 1900r / min. The role of the flying knife is to cause a strong convective movement of the material in the axial direction. The number of flying knives depends on the scope of their action.

The fourth is the injector, its position, spray direction and the ability to atomize silicone oil affect the dispersion of silicone oil. For example, when silicone oil is sprayed near the flying knife, its initial dispersion is through material convection; silicone oil is sprayed to the opposite side of the flying knife, and its initial dispersion is caused by severe frictional sharing and diffusion between the material particles. The two dispersion effects are clearly different.


Application of Plough Shear Mixer Machine

  • Food

  • Chemical industry

  • Coating

  • Medicine

  • Feed

  • Fuel

  • Metallurgy, mine 


Main Features of Plough Shear Mixer Machine

  1. (1)It is in high speed for cutting, crushing, blending the materials

  2. (2)It is with attractive appearance under advance processing technology, there is

  3. smaller gap between the ploughshare and chamber

  4. (3)Main shaft seal With PETP and air-purged, double seal

  5. (4)It can be added with heating or cooling jacket device if necessary

  6. (5)Full stainless steel construct except bearing parts, very elegant and generous


Technical Data of Ploughshare Mixer Machine

Technical Data

Model

NLD-200L

NLD-300L

NLD-500L

NLD-1000L

NLD-1500L

NLD-2000L

NLD-3000L

Effective volume

200L

300L

500L

1000L

1500L

2000L

3000L

Fully volume

220L

325L

545L

1090L

1630L

2160L

3260L

Turning speed

53RPM

53RPM

45RPM

45RPM

39RPM

39RPM

39RPM

Total weight

450KG

650KG

980KG

1300KG

1600KG

2200KG

2600KG

Total power

4KW

5.5KW

7.5KW

11KW

15KW

18.5KW

22KW

Length

1800MM

1900MM

2050MM

2500MM

2950MM

3330MM

3350MM

Width

900MM

1000MM

1050MM

1200MM

1350MM

1500MM

1880MM

Height

1110MM

1200MM

1250MM

1350MM

1400MM

1650MM

1950MM

Power supply

3P AC208-415V 50/60HZ


Leave a Message