EN

Pulling Type Paddle Mixer

  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer
  • Pulling Type Paddle Mixer


The pulling type paddle mixer machine is mainly used for anti-cracking mortar, thermal insulation mortar, bonding mortar, plastering mortar, floor mortar and other dry powder mortars with high mixing uniformity and high-grade putty powder. Concrete admixtures, feeds, chemical powders, food flavors and other industries have also been greatly applied, and it is not suitable for the mixing of raw materials with a particularly large amount of spray and particularly large viscosity of materials.


Product Description of Pulling Type Paddle Mixer Machine

Pulling type paddle mixer machine is widely used for drying and mixing of dry powder mortar, chemical, pesticide, detergent, pigment food, monosodium glutamate, milk powder, salt, feed, chemicals, ceramics, plastics, rubber additives, and other powders.

Pulling type paddle mixer machine is also called a non-gravity door open type mixer. Based on the long-term practice in the field of mixers, the equipment overcomes the shortcomings of horizontal mixer cleaning and uses gear reduction gearbox and mixer rotor direct connection transmission for higher reliability and longer service life.


Structural Characteristics of Pulling Type Paddle Mixer Machine

The right end surface of the pulling type paddle mixer machine body is provided with a non-drive endplate, the left end is provided with a drive endplate, the lower end of the drive end plate is disposed inside the track, and the motor reducer and the rotor shaft are respectively provided with two, the left end of the rotor shaft and the output end of the motor reducer is connected and connected, and the rotor shaft is assembled inside the mixer body through the driving endplate. The rotor shaft is symmetrically arranged inside the mixer body, the blade is assembled on the rotor shaft, and the track is arranged on the lower side of the mixer body. The lower end opens a discharge door, and a shaft seal is arranged at a connection between the rotor shaft and the output end of the motor reducer.

The Pulling type paddle mixer machine is a new high-efficiency material mixer independently developed and designed by the Neil mechanical design team based on the twin-blade gravity-free mixer. This model maintains the advantages of the previous generation double-mix mixer. On the basis of the design of the side-opening door, the cleaning efficiency and mixing speed are greatly improved, the mixing time is shortened, and the production efficiency is greatly improved.


Application of Pulling Type Paddle Mixer

  • Dry mortar

  • Chemicals, chemicals, detergents,

  • Feed, pesticides,

  • Pigment food, monosodium glutamate, milk powder, salt

  • Ceramic, plastic, rubber additives


Main Features of Pulling Type Paddle Mixer

  1. (1) Easy to clean, side-opening door design makes machine cleaning more convenient and saves production time

  2. (2) The rotation speed of the shaft driven by the reducer and the structure of the blade will weaken the gravity of the material. With the lack of gravity, the difference in particle size and a specific gravity of each material is neglected during the mixing process.

  3. (3) The intense mixing movement shortens the mixing time, which is faster and more efficient.

  4. (4) Even if the material has a difference in specific gravity and particle size, a good mixing effect can be achieved under the rapid and vigorous tumbling of the staggered stirring blades.


Technical Data of Pulling Type Paddle Mixer

Technical Data

Model no.

Effective Vol

Loading ratio

Power

Speed

Dimension (mm)

Weight

NCL-300

300L

0.6-0.8

4KW

53r/min

3240X1035X1430

580kg

NCL-500

500L

0.6-0.8

7.5KW

53r/min

3390X1160X1480

860kg

NCL-1000

1000L

0.6-0.8

11KW

45r/min

3590X1380X1630

1530kg

NCL-1500

1500L

0.6-0.8

15KW

45r/min

3880X1550X1810

1980kg

NCL-2000

2000L

0.6-0.8

18.5KW

39r/min

4180X1780X1930

2590kg

NCL-3000

3000L

0.6-0.8

22KW

31r/min

4430X1910X2040

3620kg

Power supply

AC 3 Phase 208-415V 50/60HZ      


Leave a Message