1. Wide lifting rage: Bucket elevator has few requirements on the types and characteristics of materials, which can not only lift general powder and small particle material, but also lift the material with great grinding ability.
2. Fine sealing performance and less environmental pollution.
3. Low driving power: It applies the way of inflow feeding and induced discharging, adopts hopper intensive arrangement that with large capacity, and has less ineffective power when lifting materials for no reclaim or digging.
4. Long service life: The feeding of the elevator adopts the flow type which is no need to use the bucket to dig and causes less extrusion and collision between materials. This machine is designed to ensure that the materials do not scatter when feeding and discharging, thus the wear of machine is reduced.
5. High lifting height: The elevator operates smoothly, so it can reach a high lifting height.
6. High operational reliability: Excellent design principle and manufacturing technology ensure the reliability of the the whole machine.
II. Application scope and features of bucket elevator
Used for vertical conveying of materials, and the conveying height is within 3-60 meters, which is suitable for vertical lifting of materials in large and medium-sized three-dimensional structure feed mills.This machine has compact structure, small floor space, wide application range and good sealing performance.
Bucket Elevator consists of operation section (hopper and traction tape), upper section that with driving drum, lower section with tensioning drum, intermediate casing, drive device and reverse brake, etc. It is suitable for upward transportation of powder, granular and small non-abrasive and semi-abrasive bulk materials such as fertilizer, grain, coal, sand, coke, cement and crushed ore.
September 28, 2020The spiral ribbon mixer of Shanghai Niel Machinery looks like a luminous building from a distance. The 304 stainless steel mirror with wire drawing structure makes the spiral ribbon mixer look high-en...view
September 24, 2019Shanghai Neil Machinery Manufacturing Co., Ltd. completed the production of a large material conveying system and delivered it to Shanghai Yoshikawa Coating Co., Ltd. on the same day.view
April 7, 2020The bucket elevator Z of Jiangsu fengri is used to lift materials from low to high. After the materials are put into the hopper through the vibration table, the machine will automatically and continuo...view
April 7, 2020The principle of powder filling production line is to decompose a repeated production process into several sub processes. The former sub process creates execution conditions for the next sub process. ...view
December 17, 2019Recently, Neil Machinery's multipowder material handling system has been installed and commissioned in the customer's factory. This production line is suitable for the food industry, chemical ...view